Welcome to Master Surface Technology
Phone. +39 045 8511408
Concrete - Polishing - EDGE POLISHING MACHINES - FLAT EDGE POLISHING WHEELS RESIDIAM D.125mm AND 150mm
FLAT EDGE POLISHING WHEELS RESIDIAM D.125mm AND 150mm
Diamond resin flat edge polishing wheels in diameter 125mm and 150mm with snail attachment , used for roughing, honing, polishing .
The supports of the flat edge polishing wheels are all of the same color, while the diamond part is produced in the color of the grain that identifies, as shown in the table on the left side.
VARIANT WITH RUBBER:
The flat edge polishing tool residiam can be supplied on request with an amortising rubber of 1 cm, thicker than the one normally used. This allows the tool to adapt even better to the coast on machines that do not have perfect alignment.
The rubber variant is identified with the letter "G" added to the item code.
ADVANTAGES COMPARED TO A TRADITIONAL ABRASIVE:
- Increased removal (so it is possible to reduce the number of heads)
- Longer life of the tool
- Homogeneous consumption of the tool
- No downtime
- Constancy and quality performance for all the tool time
- Energy saving for less pressure in use and therefore less breaks
- Reduction of sludges of the processing and lowering of disposal costs
- Lower transport costs and reduced storage space
- Product unalterability
- Absence of aggressive components in the tool for the system protection and waste water (almost total absence of salt)
- Better finishing on the slab edge
The supports of the flat edge polishing wheels are all of the same color, while the diamond part is produced in the color of the grain that identifies, as shown in the table on the left side.
VARIANT WITH RUBBER:
The flat edge polishing tool residiam can be supplied on request with an amortising rubber of 1 cm, thicker than the one normally used. This allows the tool to adapt even better to the coast on machines that do not have perfect alignment.
The rubber variant is identified with the letter "G" added to the item code.
ADVANTAGES COMPARED TO A TRADITIONAL ABRASIVE:
- Increased removal (so it is possible to reduce the number of heads)
- Longer life of the tool
- Homogeneous consumption of the tool
- No downtime
- Constancy and quality performance for all the tool time
- Energy saving for less pressure in use and therefore less breaks
- Reduction of sludges of the processing and lowering of disposal costs
- Lower transport costs and reduced storage space
- Product unalterability
- Absence of aggressive components in the tool for the system protection and waste water (almost total absence of salt)
- Better finishing on the slab edge
Request information
MATERIAL:
Concrete agglomeratesMACHINE:
Edge polishing machinesFINISHING:
PolishedPRODUCT TECHNICAL DATA
AVAILABLE DIAMETERS:
125mm, 150mmAVAILABLE ATTACHMENTS:
Right snailLeft snail
TOTAL HEIGHT:
28mmHEIGHT OF THE DIAMOND PART:
13mmSUPPORT:
Plastic PVCHEIGTH OF THE SUPPORT:
15mmWEIGHT D.125:
380gWEIGHT D.150:
400gTABLE OF GRITS, COLORS AND CODES:
| GRITS | CODES D.120 | CODES D.150 | BOXES OF |
| 46 | T3RES12046P | T3RES15046P | 6 |
| 60 | T3RES12060P | T3RES15060P | 6 |
| 120 | T3RES120120P | T3RES150120P | 6 |
| 220 | T3RES120220P | T3RES150220P | 6 |
| 320 | T3RES120320P | T3RES150320P | 6 |
| 400 | T3RES120400P | T3RES150400P | 6 |
| 600 | T3RES120600P | T3RES150600P | 6 |
| 800 | T3RES120800P | T3RES150800P | 6 |
| 1800 | T3RES1201800P | T3RES1501800P | 6 |
| 3500 | T3RES1203500P | T3RES1503500P | 6 |
© 2026 MASTER SURFACE TECHNOLOGY - P.iva 04252120235 - R.E.A. VR 405173 - C.S. 10.000