Welcome to Master Surface Technology
Phone. +39 045 8511408
Concrete - Polishing - AUTOMATIC MACHINES: MULTIPLE AND SINGLE-HEAD - FRANKFURT RESIDIAM REVERSE® MAGNUM 2
FRANKFURT RESIDIAM REVERSE® MAGNUM 2
Diamond resin tool with Reverse® Frankfurt attachment in MAGNUM 2 SHAPE for MULTIPLE MACHINES, AUTOMATIC or MANUAL SINGLE-HEAD MACHINES and FLOOR MACHINES.
It is recommended on heavy machines and highly abrasive stones.
From grain 24 to 320 is available in 4 different hardnesses: TT, A, B, PS.
From grain 3/4 to 5000 is available in 2 different hardnesses: N, TT.
The "RAPID" knurling facilitates the opening of the tool and therefore the immediate processing of the material.
It allows a more homogeneous consumption of the tool, with a consequent lifeincrease, processing quality and a better finishing on the edge of the slabs.
The Frankfurt Reverse® is equipped with removable lateral flaps, which, through the color, mark the grain, as indicated in the table.
ADVANTAGES COMPARED TO A TRADITIONAL ABRASIVE:
- Increased removal (so it is possible to reduce the number of heads)
- Longer life of the tool
- Homogeneous consumption of the tool
- No downtime
- Constancy and quality performance for all the tool time
- Energy saving for less pressure in use and therefore less breaks
- Reduction of sludges of the processing and lowering of disposal costs
- Lower transport costs and reduced storage space
- Product unalterability
- Absence of aggressive components in the tool for the system protection and waste water (almost total absence of salt)
- Better finishing on the slab edge
The Frankfurt Residiam tool is available in different geometric shapes, to be adapted to any type of machine and to attachment any kind of surface, also those with resin and mastic, regardless of the number of heads or from the material used.
It is recommended on heavy machines and highly abrasive stones.
From grain 24 to 320 is available in 4 different hardnesses: TT, A, B, PS.
From grain 3/4 to 5000 is available in 2 different hardnesses: N, TT.
The "RAPID" knurling facilitates the opening of the tool and therefore the immediate processing of the material.
REVERSE® INNOVATION:
The Frankfurt Residiam Reverse® works always to its full capacity as its larger part is placed towards the outside of the plate, where the peripheral speed is higher.It allows a more homogeneous consumption of the tool, with a consequent lifeincrease, processing quality and a better finishing on the edge of the slabs.
The Frankfurt Reverse® is equipped with removable lateral flaps, which, through the color, mark the grain, as indicated in the table.
ADVANTAGES COMPARED TO A TRADITIONAL ABRASIVE:
- Increased removal (so it is possible to reduce the number of heads)
- Longer life of the tool
- Homogeneous consumption of the tool
- No downtime
- Constancy and quality performance for all the tool time
- Energy saving for less pressure in use and therefore less breaks
- Reduction of sludges of the processing and lowering of disposal costs
- Lower transport costs and reduced storage space
- Product unalterability
- Absence of aggressive components in the tool for the system protection and waste water (almost total absence of salt)
- Better finishing on the slab edge
The Frankfurt Residiam tool is available in different geometric shapes, to be adapted to any type of machine and to attachment any kind of surface, also those with resin and mastic, regardless of the number of heads or from the material used.
Request information
MATERIAL:
Concrete agglomeratesMACHINE:
Automatic machines: multiple and single-headFINISHING:
PolishedPRODUCT TECHNICAL DATA
TOTAL HEIGHT:
47mmHEIGHT OF THE DIAMOND PART:
21mmSUPPORT:
Plastic PVCHEIGHT OF THE SUPPORT:
26mmWEIGHT:
470gTABLE OF GRITS, COLORS AND CODES:
| GRITS | CODES | BOXES OF |
| 24 | T2RES24AR | 6-18-48 |
| 36 | T2RES36AR | 6-18-48 |
| 46 | T2RES46AR | 6-18-48 |
| 60 | T2RES60AR | 6-18-48 |
| 80 | T2RES80AR | 6-18-48 |
| 120 | T2RES120AR | 6-18-48 |
| 180 | T2RES180AR | 6-18-48 |
| 220 | T2RES220AR | 6-18-48 |
| 280 | T2RES280AR | 6-18-48 |
| 320 | T2RES320AR | 6-18-48 |
| 3/4 | T2RES3/4AR | 6-18-48 |
| 400 | T2RES400AR | 6-18-48 |
| 600 | T2RES600AR | 6-18-48 |
| 800 | T2RES800AR | 6-18-48 |
| 1200 | T2RES1200AR | 6-18-48 |
| 2000 | T2RES2000AR | 6-18-48 |
| 3000 | T2RES3000AR | 6-18-48 |
| 5000 | T2RES5000AR | 6-18-48 |
© 2026 MASTER SURFACE TECHNOLOGY - P.iva 04252120235 - R.E.A. VR 405173 - C.S. 10.000